Click for larger image
 

- Clear and colorless for quick and easy clean-up
- Exceptional lubricity for super fast pulls
- Polymer based formula perfect for all electrical and acom applications
- Safe to use with all cable types
- Remains stable over wide temperature range -- usable from 30°F to 180°F (-1°C to 82°C)
- Dries to a semi fluid film that won't clog conduit
- Clings to cable throughout long pulls
- Easy to apply by hand, brush, or pump
- Non toxic, non flammable, and non corrosive
 

Click for larger image
 

Features the same excellent qualities as Aqua-Gel® II Cable Pulling - Lubricant with a lower viscosity for easy pouring and pumping

- Pourable formula clings to cable -- eliminates hand application for a cleaner and safer job
- Compatible with all cable types
- Cleans up easily with soap and water
- Non toxic, non flammable, and non corrosive

Click for larger image
 

- Polymer-based formula provides maximum tension reduction in high-stress electrical and cable-pulling operations
- Compatible with all cable types
- Cleans up easily with soap and water
- Remains stable over wide temperature range -- usable from 28°F to 180°F (-2°C to 82°C)
- Dries to a semi-fluid film that won't clog conduit
- Easy to apply by hand, brush, or pump
- Non-toxic, non-flammable, and non-corrosive

Click for larger image
 

- Superior lubricity at low temperatures
- Polymer-based, cold weather formula remains stable to -25°F (-32°C)
- Safe to use on all cable types
- Cleans up easily with soap and water
- Dries to a semi-fluid film that aids in future pulls
- Clings to cable throughout long pulls
- Can be diluted with water to customize viscosity for any job situation
- Well-suited for hand, pouring or pumping application
- Non-toxic, non-flammable, and non-corrosive

Click for larger image
 

- TEFLON® additive provides greater lubricity than other wax-based lubricants
- Remains stable in high temp. -- usable from 30°F to 190°F (-1°C to 88°C)
- Dries slowly to a thin, non-conducting film that won't harden in conduit
- Creamy texture applies easily and uniformly
- Safe to use with all cable types
- Requires no mixing
- Clings to cable throughout long runs
- Easy to apply by hand or with pump
- Non-toxic, non-flammable, and non-corrosive
- TEFLON® is a registered trademark of E.I. du Pont de Nemours and Co.

Click for larger image
 

- Wax-based formula provides superior lubricity
- Safe to use with most cable types except low-density polyethylene and semi-conducting jackets
- Won't break down or separate after repeated exposure to freezing temperatures
- Dries to a thin, non-conductive film that won't clog conduit
- Clings to cable throughout long pulls
- Easy to apply by hand or with pump
- Creamy texture applies easily and uniformly blend requires no mixing
- Won't dry out -- surface coat forms to control evaporation
- Non-toxic, non-flammable, and non-corrosive